In the stone production line, the relatively large amou […]
In the stone production line, the relatively large amount of equipment used is the crusher equipment, including a jaw crusher for coarse crushing of stone, a secondary crusher for secondary crushing, or a heavyweight crusher for one time. Sometimes, impact crusher (sand making machine) equipment is required according to the process requirements. Where, in the stone production line, most of the maintenance work of the equipment is for the maintenance work of the crusher equipment. Doing this part of the work will make the maintenance work of the stone production line smoothly completed. The maintenance and repair of the crusher equipment is briefly described from three important aspects.
1, bearing maintenance
The bearing part of the crusher is the most likely to be broken. In use, the wear is relatively large, so it needs frequent maintenance. It is often necessary to increase the service life of the bearing.
Regular attention and timely lubrication of the friction surface can ensure the normal operation of the jaw crusher and extend the service life of the equipment. The grease added to the housing is 50-70% of the volume and must be replaced every three months. Clean the running track of the bearing roller with clean gasoline or kerosene. When the bracket is in contact with the bracket, the grease must be injected before the crusher starts.
3, daily aspects
In order to ensure that the crusher is in a good technical state, it can be put into operation at any time, reduce downtime, improve the crusher integrity rate, utilization rate, reduce crusher wear and prolong the life of the crusher; do regular maintenance, mandatory, correct Dealing with the relationship between maintenance and repair is not allowed to be used only or not.