How to reduce the sudden stoppage of the crusher

Release time:01-12-2019
Abstract:

The sudden shutdown of the jaw crusher will cause great […]

The sudden shutdown of the jaw crusher will cause great damage to the equipment, affect the normal operation of the equipment and reduce its production. Therefore, this phenomenon should be reduced in production, how to reduce the sudden shutdown of the jaw crusher?

In the production, according to the requirements of the jaw crusher for the crushed materials, the suitable materials should be evenly injected into the crushing chamber. The materials to be injected should not be too much, and the water-containing materials should be pretreated. At the same time, it is forbidden to enter the crushing cavity by non-broken hard objects, otherwise it will cause great damage to the equipment and even cause the jaw crusher to be forced to stop.

Check machine parts regularly

1. Check the tightness of the V-belt. If the V-belt is too loose, it will not provide enough power for the operation of the equipment. If it is too tight, the belt will be particularly easy to break and it will affect the operation of the jaw crusher. Therefore, before each start of the machine and during the crushing of the equipment, it is necessary to check whether the tightness of the belt is appropriate.

2. Check the working voltage. If the jaw crusher is unstable or too low, it is easy to stop the equipment. Therefore, the working voltage of the jaw crusher should be checked regularly and adjusted in time to meet the requirements of the working voltage of the main engine.

3. Check if the parts are loose. If the eccentric shaft tightening bushing is loose, the eccentric shaft will be stuck, resulting in equipment downtime. In addition, if any other components are loose, it will affect the normal operation of the equipment. Therefore, in the production should pay attention to check whether the components are loose, to ensure the firm installation of the components.