HSEP Electrostatic Precipitator is a new type of high efficiency electric dust collector designed and manufactured by our company on the basis of absorbing advanced technologies of domestic and foreign electric dust collectors. It has more reasonable technology, more convenient installation and maintenance, more stable and reliable operation, light weight and high dust removal efficiency. It is the ideal equipment to control dust pollution in industrial kilns, such as electric power, building materials, metallurgy, and chemical industries.
advantage:
■ Electrostatic precipitator selection and structural design are more flexible. According to different working conditions can choose more suitable equipment.
■ Box-type frame structure, light weight, high strength, good stability, convenient installation, and suitable for high concentration, high negative pressure process dust collection.
■ Board line matching is more reasonable. The advanced board line matching effectively improves the average voltage of the electric field and the current density of the board, and the dust collection efficiency is higher.
■ The flexible air intake method and the advanced air distribution device and the pre-dust collection device are designed so that the Electrostatic precipitator can meet different process layouts and deal with gases with different dust concentrations.
Cement industry electric dust collector main technical parameters
Treatment of smoke volume |
20000- 2300000m³/h |
Permissible flue gas temperature |
70-400℃ |
Allow entrance dust concentration |
10-1300g/Nm³ |
Shell pressure |
2000-13000Pa |
Running resistance |
200-600Pa |
Export emissions |
≤50mg/Nm³ |
Note: The exact parameters depend on the conditions of various working conditions. The design drawings shall prevail
Number of rooms |
1-2 |
Number of channels per room |
9-40 |
Electric field height |
5-15m |
Number of electric fields |
1-6 |
Number of dust collecting plates per field |
5-12 |
Pole spacing |
300-500mm |
Cross-sectional area |
10-494m |
Main technical parameters of electric dust collector
Unit capacity(MW) |
25-30 |
100-125 |
200 |
300 |
600 |
Treatment of smoke volume(m³/h) |
100000-300000 |
700000-900000 |
1300000-1850000 |
1500000-2000000 |
3200000-3800000 |
Flue gas temperature(℃) |
130~170 |
130~180 |
130~180 |
130~200 |
130~200 |
Pressure loss(Pa) |
<200 |
<200 |
<200 |
<200 |
<200 |
Electric field wind speed(m/s) |
0.9-1.1 |
1.0-1.3 |
0.9-1.4 |
1.0-1.3 |
1.0-1.3 |
Leakage rate(%) |
≤5 |
≤5 |
≤5 |
≤5 |
≤5 |
Single electric field effective section(m²) |
55-100 |
90-110 |
140-165 |
190-230 |
190-400 |
Number of stations |
1-2 |
2 |
2 |
2 |
2-4 |
Pole spacing(mm) |
400 |
400 |
400 |
400 |
400 |
Working pressure(Pa) |
-3000~-4000 |
-3000~-4000 |
-3000~-5000 |
-5000~-6500 |
-5000~-6500 |
Effectiveness(%) |
>99 |
>99 |
>99 |
>99 |
>99 |
Inlet concentration(g/m³) |
≤50 |
≤50 |
≤50 |
≤50 |
≤50 |
Export concentration(mg/Nm³) |
≤50~100 |
≤50~100 |
≤50~100 |
≤50~100 |
≤50~100 |
Note: The exact parameters depend on the conditions of the various working conditions. The design drawings shall prevail.
Metallurgical Industry Electrostatic Precipitator Main Technical Parameters
Treatment of smoke volume(m³/h) |
<1400000 |
Flue gas temperature(℃) |
≤400 |
Pressure loss(Pa) |
<200 |
Leakage rate(%) |
≤5 |
Pole spacing(mm) |
400 |
Effectiveness(%) |
>99 |
Export concentration(mg/Nm³) |
≤50~100 |
Note: The exact parameters depend on the conditions of the various working conditions. The design drawings shall prevail.